Husqvarna FS 400 saw Plus 3 - 18 inch Hammerhead Diamond Blades

Availability: In Stock
Product Code: Promo Husqvarna FS 400 saw Plus 3 - 18 inch Hammerhead Blades
  • $2,490.00

Husqvarna FS 400

Robust, convenient all-round floor saw. The adjustable handle
ensures low vibrations and an ergonomic working position. Also,
perfect weight distribution means excellent stability while sawing.

Ideal for small road repair jobs in concrete or asphalt.
Cutting trenches for pipe laying.
Making expansion joints in concrete floors.
Cutting channels for impedance loop fittings or cable
Productive saw with excellent weight distribution and
Adjustable, low-vibration handlebar for operator comfort.
Patented gas-assisted raise/lower system.
Easy to transport and lift.
Optimum power transmission to the blade due to the
Poly V-belt.
Large integrated water tank is standard.
Technical specifications
Maximum blade diameter, in (mm) 18 (450)
Maximum depth of cut, in (mm) 6-5/8 (168)
Average bladeshaft, rpm 2,800
Blade flanges, in (mm) 4-1/2 (114)
Power source Gasoline
Maximum power, hp*/engine manufacturer 11/Honda
Arbor size, in (mm) 1 (25.4), drive pin
Bladeshaft diameter, in (mm) 13/16 (21.5)
Displacement, cu in (l) 23.7 (389)
Bore/stroke, in (mm) 3.5 (88)/2.5 (64)
Cylinders/cycle 1/4
Fuel capacity, gal (l) 1.6 (6.1)
Oil capacity, qt (l) 2.3 (1.1)
Air filter Dry type dual element cyclone
Starter Recoil
Engine cooling Air
Axle front/rear, in (mm) 3/4 (19)/3/4 (19)
Wheels front, in (mm) 5 x 1-1/2 x 5/8 (125 x 38 x 16)
Wheels rear, in (mm) 8 x 1-1/2 x 5/8 (203 x 38 x 16)
Handlebar adjustment Yes
Blade guard type Bolted
Number of belts 12 rib Poly V-belt
Blade depth control Screw feed
Engine specifications GX390
Maximum weight uncrated, lbs (kg) 219 (99)
Maximum weight crated, lbs (kg) 276 (125)
Dimensions uncrated, in (mm) LxWxH 42 x 20 x 30 (1,067 x 508 x 991)


Over the years one of the hottest selling blades in America has been the Hammerhead Blade. We've been very proud of the overwhelming response we've received over the years but decided it was time to go from good to great and now we definitely feel we have.

We increased the diamond concentration and gave it an amazing segment height of 13mm, which is one of the industries highest, and added our trademark of 6 over-sized cooling holes to give the blade a better cooling capacity.  We didn't stop there, we gave the blade a thinner core at only .118 " thickness in witch added much higher speed thru the cut and minimized the chipping as it cut some of the harder aggregates.

You wont believe the value we packed into this blade.  Concrete, brick, block, pavers, precast, blue stone, sandstone you name it and it will cut it.

Dollar for Dollar we definitely feel this blade is the best in the market!

Add your review

Note: HTML is not translated!
    Bad           Good